News louvre windows
  S9
  S9iV
  S9iVt-05
    Installation proposals
    Automatic controls
    Manual controls
    Manual
    Order form
    Specification
    Gallery S9iVt-05
  System naco/weatherbeta

Applications

HAHN-Louvre Windows S9iV and S9iVt-05 can be used wherever optimal adjustable ventilation is required, together with an elegant aesthetic appearance and a high degree of air-tightness once closed. Typical examples are schools and kindergartens, kitchens, stairways, skylights, conservatories and other glazed constructions. A single blade HAHN-Louvre Window positioned above fixed glazing is particularly recommended, avoiding rain and dirt washing down over the main area of glazing.
If insect screens are required, the windows can be equipped with offset bearings, which allow the glass blades to open mainly to the outside.


 
 
Material

HAHN-Louvre Windows S9iV are made of aluminium, either silver anodised or powder-coated in any RAL colour. The control mechanism can be at either left or right hand sides, and is combined with the locking system. Special handles can be incorporated for remote control. (By request)
The glazing seals feature double weather strips with a nylon lip between. The horizontal sections at the head and the sill use silicone profiles to seal. The horizontal glass edges are enclosed with special aluminium sections which have two weather seals and overlap for air-tightness.
On request the HAHN-Louvre Window S9iV can be made as an S9iVt-05, which incorporates a thermal barrier in the aluminium profiles.


 
 
Glazing

The double-glazed louvres can utilise the same glass types as normal, up to a maximum thickness of 28mm, resp. 32mm.
 
 
Sizes

HAHN-Louvre Window S9iV and S9iVt-05 are produced with 1, 2, 3, or 4 louvres, which are controlled by one handle. Larger sizes can be achieved by a combination of any of these four basic models. Our concealed operating system „ Metro“ allows up to 12 louvres linked to only one handle (prefered link for remote control). If the height of the opening cannot be made to suit the louvre elements, the louvres can be adapted in height.
Further, the height of the louvre blades can be increased up to 300 mm. The width of the window should not exceed 1600 mm. Larger widths can be achieved by using multiple units with vertical dividing bars between.

No. of Louvres Combination Jamb-height in mm Height incl. surround frame
1 - 205 231
2 - 408 434
3 - 611 638
4 - 814 841
5/2 2+3 1.018 1.045
6/2 3+3 1.221 1.248
7/2 3+4 1.424 1.451
8/2 4+4 1.627 1.654
9/3 3+3+3 1.831 1.957
10/3 3+3+4 2.034 2.060